Granite machine components are widely used in CMMs, CNC machines, optical equipment, and high-precision instruments due to their exceptional stability, wear resistance, and vibration damping properties. However, improper handling or maintenance can lead to reduced accuracy and premature wear. Follow these critical best practices to maximize performance and longevity.
1. Maintain Stable Temperature Conditions
While granite has a low thermal expansion coefficient, prolonged exposure to temperature fluctuations can cause micro-deformations. For optimal results:
Install in temperature-controlled environments (20±2°C recommended)
Avoid placing near heat sources or cooling vents
2. Prevent Physical Impact & Overloading
Granite is hard but brittle-sudden impacts can cause chipping or cracks, especially at edges.
Use specialized lifting tools during installation
Add protective bumpers around vulnerable edges
Never exceed the rated load capacity
3. Clean Regularly with Proper Methods
Although resistant to most chemicals, granite can degrade with prolonged exposure to strong acids/alkalis.
Wipe surfaces daily with a microfiber cloth
Use pH-neutral cleaners for deep cleaning
Immediately remove coolants or oils to prevent staining
4. Ensure Proper Mounting & Support
Improper installation induces stress concentrations, risking cracks or warping.
Verify base flatness with a precision level
Use multi-point support systems for large components
Allow for thermal expansion gaps if needed
5. Schedule Regular Precision Checks
Even high-grade granite experiences microscopic wear over time.
Perform annual laser calibration (or per ISO 8512-2)
Document measurements to track performance trends
Re-lap surfaces if flatness exceeds 0.005mm tolerance
Why These Steps Matter
Neglecting these guidelines may lead to:
✖ Measurement errors in CMM/CMM applications
✖ Reduced machine tool accuracy
✖ Costly replacements due to avoidable damage






