Our granite surface plates are crafted to meet the highest quality standards for precision applications. Below are the technical specifications and quality requirements for granite surface plates used in various industrial fields:
Surface Defects:
The working surface of the granite plate must be free from serious defects that could affect appearance or functionality. These include sand holes, air pockets, cracks, slag inclusions, shrinkage, scratches, impacts, and rust stains.
Surface Repair:
Minor defects, such as concavities or corner damage on non-working surfaces, are allowed to be repaired.
Material Quality:
Our surface plates are made from fine-grained, dense materials like diorite, basalt, or granite (with mica content under 5%). The elasticity modulus should be greater than 0.6 × 10^3, and the water absorption rate must be less than 0.25%. The working surface hardness of the plate should be greater than 70 HS.
Surface Roughness:
The surface roughness of the working surface must be between 0.32 to 0.63 µm (Ra), and the side surfaces should have a roughness of 10 µm.
Perpendicularity Tolerance:
The perpendicularity tolerance between the side surfaces and the working surface, as well as the perpendicularity between adjacent side surfaces, must meet the 12th-grade standard specified in GB/T1184.
Handling Recommendations:
For Grade 000 and Grade 00 surface plates, we recommend not adding lifting handles to avoid potential distortions.
Thread Holes or Grooves:
If thread holes or grooves are added to Grade 0 and Grade 1 plates, their height should not exceed the working surface.
Commitment to Quality
At UNPARALLELED, we continually enhance our production technology while strengthening and perfecting our quality assurance system. Every stage of the manufacturing process is strictly controlled, and every product undergoes rigorous quality inspection. We are committed to ensuring product quality and achieving a record of zero customer returns.






