The hardness of granite is a critical factor that dictates its practical applications, service life, and overall performance. Typically expressed using Mohs or Shore hardness scales, these parameters directly impact machining difficulty, wear resistance, and dimensional stability. Choosing the right granite requires careful consideration of the intended usage environment.
During the processing stage, granite hardness plays a decisive role. Softer granites with a Mohs hardness of 3–4 are easier to cut, grind, and drill, making them ideal for complex-shaped components such as instrument bases with grooves. Processing efficiency can be up to 40% higher compared to harder stones. However, softer granite surfaces are more prone to scratches, and in precision applications, long-term use can result in flatness deviations exceeding 0.02mm/m. By contrast, high-hardness granite with a Mohs hardness of 5–6 demands diamond tooling, which increases production costs by 20–30%, but achieves superior surface quality, often with roughness below Ra0.8μm. This makes it particularly suitable for high-precision measuring instruments and equipment.
Granite hardness also significantly influences wear and impact resistance. Stones with Shore hardness above 70HS offer exceptional wear resistance, maintaining annual wear to within 0.01mm in high-contact environments such as machine tool guideway supports, and extending service life by three to five times compared to softer varieties. Yet, higher hardness correlates with increased brittleness; under severe impact, such granite may crack, limiting its use in vibration-prone environments. Medium- to low-hardness granite, with Shore hardness of 50–60HS, exhibits greater toughness and impact resilience, making it ideal for laboratory workbenches or bases that require frequent movement.
Precision retention is another area where hardness matters. High-hardness granite features a denser crystal structure and a lower thermal expansion coefficient (typically ≤5×10⁻⁶/°C), providing excellent dimensional stability even in workshops with fluctuating temperatures. This ensures micron-level precision over extended periods. Softer granite, conversely, is more susceptible to humidity and pressure variations, leading to minor deformations and limiting its suitability to less critical applications such as support bases for general equipment. Additionally, harder surfaces resist dust and oil accumulation, simplifying maintenance and preserving accuracy.
In practice, selecting the appropriate granite hardness involves balancing machinability, impact resistance, and precision requirements. For high-precision instruments, granite with Mohs hardness of 5 or higher is recommended. Medium-hardness granite is well-suited for environments with frequent impacts, while softer varieties may be chosen for intricate, irregular components where ease of processing is a priority. Thoughtful matching of hardness parameters ensures maximum performance, durability, and cost-efficiency.






