How To Order Custom Granite Components: Drawing Requirements, Tolerances, Lead Time And Inspection Report

Nov 19, 2026 Leave a message

Ordering a custom granite machine base or component is not like ordering a standard catalog part. The drawing, the tolerances, the material and the inspection method all affect price, lead time and final accuracy.

This guide walks you through the full process, from preparing your request to receiving inspected parts, so that your first quotation is accurate and your order runs smoothly.

Step 1: Prepare Your Request for Quotation (RFQ)

The more complete your first message is, the faster and more accurate the quotation will be. Include:

  • A 2D drawing (PDF, DWG or DXF) and, if available, a 3D model (STEP or IGES)
  • Quantity: a single prototype, a small batch or a regular supply
  • Material requirement: for example, black granite with a specified minimum density
  • Required standards or grades, if any (DIN 876, ASME B89.3.7, JIS, GB or your own specification)
  • Application: CMM, semiconductor equipment, laser machine, air-bearing stage and so on
  • Delivery destination and required delivery date
  • Special requirements: packaging, documents, inspection witnessing

If you only have a sketch or a concept, that is fine. Our engineers can help you turn it into a manufacturable design.

Step 2: Make Your Drawing Granite-Friendly

A good drawing for granite is clear about what is critical and what is not. Pay attention to the following.

Dimensions and critical surfaces

  • Mark the datum surfaces and the functional surfaces (guideway faces, air-bearing faces, mounting faces).
  • State the flatness, parallelism, squareness and perpendicularity needed for each, rather than one tight tolerance on everything. Tolerance that is tighter than necessary adds cost and time.

Features that can be machined in granite

  • Through holes and blind holes
  • Counterbores and precision bores (H7 tolerance is possible)
  • Threaded inserts, bonded in place
  • T-slots and dovetails
  • Vacuum grooves and pneumatic channels
  • Angled and compound surfaces

Design points that help

  • Avoid sharp internal corners and very thin walls, which are fragile in stone. Use radii and chamfers where possible.
  • Keep holes away from edges by a safe distance.
  • Think about weight and lifting points, because large granite parts are heavy.
  • Tell us how the part will be supported and leveled in your machine, since that affects the design.

Step 3: Specify Tolerances Realistically

Granite can be lapped to very high accuracy, but each additional level of precision increases lapping time, inspection effort and cost.

A few guidelines:

  • Tighten only what matters. A reference surface that carries an air bearing may need micron-level flatness. A non-functional side face does not.
  • Tolerances depend on size. The same flatness is harder to achieve on a 4000 mm base than on a 400 mm one.
  • Define the measuring conditions. Accuracy is normally verified at a stable temperature, with the part properly supported.
  • Ask early. If you are unsure whether a tolerance is achievable, send the drawing for review before finalizing the design.

Step 4: Confirm Material and Capability

Before you order, confirm two things.

Material. Ask which granite will be used, and for density and test data. Our UNPARALLELED® Black Granite has a density of about 3100 kg/m³ and is chosen for stability, hardness and uniform structure.

Size and capability. Large and heavy parts need suitable equipment for lifting, machining and lapping. At UNPARALLELED®, our equipment can process a single piece up to 100 tons, with lengths up to 20 meters, widths up to 4000 mm and thicknesses up to 1000 mm. Our large grinding machines can lap precision platforms up to 6000 mm long, and our production is carried out under ISO 9001, ISO 14001 and ISO 45001, with CE certification.

Step 5: Understand the Production Process

A typical process for a custom granite component looks like this:

  1. Drawing review and quotation. Our engineers check the drawing, raise any questions and send a quotation.
  2. Material selection. The granite block is selected and inspected for defects.
  3. Cutting and rough machining. The block is cut and machined close to the final size on CNC equipment.
  4. Precision machining. Holes, grooves, slots and other features are machined.
  5. Grinding and lapping. Critical surfaces are ground, then lapped, with the final accuracy achieved by experienced masters working in a temperature-controlled environment.
  6. Insert installation and assembly (if required).
  7. Final inspection. The part is measured with calibrated equipment, and the results are recorded.
  8. Packing and shipping.

Step 6: Lead Time

Lead time depends on size, quantity, complexity and the required accuracy. Large parts and high-precision lapping take longer than small, simple ones. As a general approach:

  • Prototypes and single parts are scheduled according to current production load.
  • Repeat orders are usually faster, since the process and tooling are already established.
  • Urgent orders can sometimes be accommodated. Tell us your deadline in the first message.

Please send your drawing and quantity, and we will confirm a realistic delivery date together with the quotation.

Step 7: Inspection and Documentation

Every precision part should be delivered with evidence that it meets the drawing. When ordering, ask for:

  • A final inspection report listing the measured values for the critical dimensions and geometric tolerances
  • The measurement method and equipment used (for example, electronic levels, laser interferometers, dial indicators and roughness testers)
  • Calibration certificates for the instruments, with traceability to national standards
  • Material information, such as density
  • Photos or video of the inspection, if you want additional confirmation

Our inspection equipment includes Mahr and Mitutoyo instruments, WYLER electronic levels and Renishaw laser interferometers. The equipment is calibrated by metrology institutes, and calibration is traceable to national standards. If your quality system requires it, you can also ask to witness the inspection or arrange a third-party inspection.

Step 8: Packaging and International Shipping

Granite is heavy and can be damaged by impact, so packing is part of quality.

  • Protective packing: precision surfaces are protected and secured in strong wooden cases or frames, designed for the weight and size of the part.
  • Export documents: commercial invoice, packing list, bill of lading and certificate of origin. Other documents can be prepared on request.
  • Shipping: our headquarters in Jinan is close to the port of Qingdao, which helps with sea freight. Air freight is possible for smaller parts.
  • Incoterms: please tell us your preferred terms (for example, FOB, CIF or DDP) so we can quote accordingly.
  • Receiving the goods: inspect the packaging on arrival, and let the part reach room temperature before unpacking and measuring.

Common Mistakes to Avoid

  • Sending a drawing without stating which surfaces are critical
  • Applying the tightest tolerance everywhere
  • Forgetting the environment, such as temperature during measurement
  • Ignoring weight and handling in the design
  • Choosing a supplier on price alone, without asking about material, inspection and calibration
  • Leaving packaging and shipping terms until the last minute

RFQ Checklist

☐ 2D drawing and, if available, 3D model

☐ Quantity and target delivery date

☐ Critical surfaces and geometric tolerances

☐ Required standard or grade

☐ Material requirement

☐ Application and operating environment

☐ Required documents (inspection report, calibration certificates)

☐ Packaging, destination and Incoterms

Precision Granite Factory China

Frequently Asked Questions

What file formats do you accept for drawings?
We can work with PDF, DWG and DXF for 2D drawings, and STEP or IGES for 3D models. If you only have a sketch, send it and our engineers can help.

Do you accept small-quantity or prototype orders?
Yes. We accept custom orders, from single parts to regular supply.

What is the minimum order quantity?
Because parts are made to your drawing, please send your requirements and we will advise.

Can you supply a calibration certificate and inspection report?
Yes. Our inspection equipment is calibrated and traceable to national standards, and an inspection report can be provided with your order.

How do you protect a large granite part in transport?
We use strong wooden cases or frames designed for the size and weight of the part, and we protect the precision surfaces before shipping.

Can I visit your factory?
Please contact us to arrange a visit or a video tour.

Request a Quotation for Your Custom Granite Component

Send us your drawing, quantity and requirements. Our engineers will review your project and reply with a quotation and a realistic delivery date. We accept custom orders for granite machine bases, granite assemblies, air bearings and measuring tools.